5/16, 1/2
& 5/8 inch Overlays
and 3/8 inch Lip Versions |
Tested over 50,000 Cycles
Lifetime Guarantee
|
Guaranteed
of
Course
Youngdale Knife Hinges exceed ANSI-BHMA standards for
Class-2 self closing Cabinet Hinges and come with a lifetime performance guarantee. If the
product should fail to perform properly under normal use, the hinge may be returned to us
and it will be repaired or replaced at no cost.
For additional information, see your local supplier or
contact us directly. |
Installation
Recommendations
Notches for these hinges should be cut using a 8"
maximum diameter x 9/32" wide dado blade.
For most cabinet doors, only two hinges are required. For
doors over 36" in length more hinges can be used to control warpage. For this
purpose, use enough to limit the spacing between hinges to 24".
For extra weight -- such as pantry doors with shelves or
racks -- use one extra hinge for each 10 lbs. of load.
Note: A 15" wide x 30" tall door of relatively
heavy construction will weigh between 9 & 15 lbs. We test with this door size |
